Super high quality TC4 Titanium Alloy nozzles for MK8 & V6 style hotends.
Titanium Alloy nozzles are required to print at super high temperatures, even in excess of 500 °C! These are the go-to nozzles for printing Engineering materials, such as PEEK, PEKK, PEI, and their composites.
Make sure your nozzle and HEAT BREAK's front end are tight and sealed. Otherwise, the melted filament will leak along the screw holes.
*Replacing nozzles may require re-leveling (or changing bed Z offset)
*V6 and MK8 style nozzles are 99% fully compatible with each other. V6 nozzles are exactly 0.2 mm shorter thank MK8 nozzles. So if you are changing between these styles, please remember to re-level your bed (or change bed Z offset)!