Brass Nozzle 0.2mm-1.0mm (High Precision Machined)

by TriangleLab

$4.95

Super high quality replacement Brass nozzles for MK8 & E3D V6-style hotends.

Make sure your nozzle and HEAT BREAK's front end are tight and sealed. Otherwise, the melted filament will leak along the screw holes.

*Replacing nozzles may require re-leveling (or changing bed Z offset)

*V6 and MK8 style nozzles are 99% fully compatible with each other. V6 nozzles are exactly 0.2 mm shorter thank MK8 nozzles. So if you are changing between these styles, please remember to re-level your bed (or change bed Z offset)!