Wood Fill PLA+ Filament 1.75mm 1Kg

by Ideagen3D

$39.95

High-quality PLA+ filament for a better printing experience.

Exclusive custom blend available at Ideagen only, with polishing additives to prevent nozzle clogs. Spend more time printing, and less time on maintenance!

Our Carbon Fiber and Wood Fill filaments have received special engineering attention, resulting in a much stabler and better-dispersed blend that will NOT release harmful dust during printing, unlike our competitors! Keep your indoor environment safe.

PLA is the most common material used in FDM printing. It is cheap, versatile, prints super easily, and is fully bio-degradable!

 

Specifications
Material PLA+
Diameter 1.75 ± 0.02 mm
Length 340 m
Net Weight 1 Kg
Maximum Service Temperature 52 ℃
Coefficient of Thermal Expansion 68 µm/m°C
Tensile strength ≥65 mpa
Bending modulus ≥60 mpa
Durability 4/10
Fracture pull length ≥ 3.0 %
Density 1.24 g/cm3
Water imbibition 0.05%


Printing Environment
Hotend Temperature 190-230 ℃
Bed Temperature 40-60 ℃
Enclosure Required No
Part Cooling Fan Recommended
Nozzle Stainless Steel and harder